Tracking Control of an Electro-Hydraulic Actuator System using LQR Controller

Authors

  • Norlela Ishak College of Engineering, Universiti Teknologi MARA, Malaysia.
  • Ahmad Zikri Kamarudin College of Engineering, Universiti Teknologi MARA, Malaysia.
  • Ramli Adnan College of Engineering, Universiti Teknologi MARA, Malaysia.

DOI:

https://doi.org/10.11113/elektrika.v20n2.255

Abstract

Electro-Hydraulic actuator (EHA) is a one type of application used in industry and building high performance of motion control process. Apparently, dealing with EHA behaviour is quite difficult and make the controlling process complicated. Designing Linear Quadratic Regulator (LQR) controller as a feedback controller require in selecting the weighting parameter Q and R. The result shows that the higher value of Q offers fast response and high stability by referring the placement of close-loop poles. However, the higher value of Q gives a higher error that can make position performance of hydraulic actuator become worst. In order to overcome this problem, the feedforward controller is developed by implementing the zero-phase error tracking control (ZPETC). It shows that both feedforward and feedback controller offers good tracking position performance in reducing gain and phase error.

Downloads

Published

2021-08-28

How to Cite

Ishak, N., Kamarudin, A. Z. ., & Adnan, R. . (2021). Tracking Control of an Electro-Hydraulic Actuator System using LQR Controller. ELEKTRIKA- Journal of Electrical Engineering, 20(2), 8–13. https://doi.org/10.11113/elektrika.v20n2.255

Issue

Section

Articles