Smart Current Monitoring System with Relay Breaker

Authors

  • Muhammad Rusydi Muhammad Rusydi Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia, Pagoh, 84600, Muar, Johor, Malaysia.
  • Aqira Azhar Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia, Pagoh, 84600, Muar, Johor, Malaysia.
  • Ili Najaa Aimi Mohd Nordin Faculty of Engineering Technology, Universiti Tun Hussein Onn Malaysia, Pagoh, 84600, Muar, Johor, Malaysia.
  • Siti Nor Zawani Ahmmad Malaysian Institute of Industrial Technology, Universiti Kuala Lumpur, Bandar Seri Alam, 81750, Masai, Johor, Malaysia.

DOI:

https://doi.org/10.11113/elektrika.v18n3-2.198

Abstract

Today, the high usage of electrical home appliances has increased the domestic energy consumption. To control the consumption of domestic energy, various techniques were developed to detect current flow and to measure current consumption. Usually, a current sensor was used as a detection device and then send the data wirelessly to a centre point in the house, which is placed near to the main entrance for monitoring and controlling purposes. Wireless technology can provide better connection and reducing the need for wired connection for all power sockets in a house. The usage of LCD is to display current usage for all electrical home appliances will be more useful especially for a multi-storey house. This smart current monitoring system, will help users to monitor and control their electrical home appliances current consumption. The system will monitor each power sockets and transmit the current usage data wirelessly to a centre point which helps in reducing the time to check all the appliances.

References

Khair, Ummul, A. J. Lubis, I. Agustha and M. Zulfin, "Modeling and simulation of electrical prevenion system using Arduino Uno, GSM modem, and ACS712 current sensor," in Journal of Physics: Conference Series, vol. 930, no. 1, p. 012049. IOP Publishing, 2017.

P. Gao, S. Lin, and W. Xu, “A novel current sensor for home energy use monitoring,†in IEEE Trans. Smart Grid, vol. 5, no. 4, pp. 2021–2028, 2014.

M. K. Swain, S. Mahato, R. K. Verma and K. D. Mahto, “Home automation using Arduino Uno,†in International Journal of Application or Innovation in Engineering & Management (IJAIEM), vol. 6, no. 2, pp. 41–44, 2017.

Klemenjak, Christoph, D. Egarter, and W. Elmenreich, "YoMo: The Arduino-based smart metering board," in Computer Science-Research and Development 31, no. 1-2 (2016): 97-103.

M. J. Mnati, R. F. Chisab, and A. V. D. Bossche, “A smart distance power electronic measurement using smartphone applications,†in in 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), pp. P-1. IEEE, 2017.

M. R. Kannan, M. M. Sreekanth, V. Sivanantham, K. S. Kumar, S. Ghanta, P. Surya Teja and Rajesh G. Reddy, "Integration of haptics in agricultural robotics." in IOP Conference Series: Materials Science and Engineering, vol. 225, no. 1, p. 012203. IOP Publishing, 2017.

Mishra, Shubham, S. Takkar, T. Garg, A. Kaur, P. Rakheja and Charu Rana, "Arduino based gestures to speech conversion system," in International Journal 6, no. 1 (2018): 159-160.

M. Saritha and N. Kalpana, “Development of remote buttons in Android app ( bluetooth ) to control a robo,†in International Journal of Engineering Science, vol. 7, no. 7, pp. 13775–13777, 2017.

S. Kalaiarasi, Y. Trivedi, S. Banerjee, N. Chaturvedi and U. G. Scholar, “Gesture control robot using accelerometer and voice control for the blind,†in International Journal of Engineering Science, vol. 16800, no. 4, pp. 16800–16803, 2018.

S. L. Farpat, S. S. More and S. D. Takwale, “A review : Use of Arduino board in android for home appliances,†in J. Embed. Syst. Process., vol. 2, no. 1, pp. 1–11, 2017.

Fernández, Manuel, X. Perpiñà , J. Rebollo, M. Vellvehi, D. Sánchez, T. Cabeza, S. Llorente and X. Jordà , "Solid-state relay solutions for induction cooking applications based on advanced power semiconductor devices." in IEEE Transactions on Industrial Electronics 66, no. 3 (2019): 1832-1841.

S. Sahu, D. Paul and S. Senthilmurugan, “Density based traffic signal system," in International Journal of Innovative Research in Science, Engineering and Technology 3, no. 3 (2014): 2218-2222.

N. Kaur and S. Monga, “Comparsions of wired and wireless networks: A review,†in International Journal of Advanced Engineering Technology 5, no. 2 (2014): 34-35.

S. A. Arduino, "Arduino," in Arduino LLC (2015).

R. Pahuja and N. Kumar, “Android mobile phone controlled Bluetooth robot using 8051 microcontroller,†in International Journal of Scientific Engineering and Research 2, no. 7 (2014): 14-17.

S. M. Darroudi and C. Gomez, “Bluetooth low energy mesh networks: A survey,†in Sensors, vol. 17, no. 7, p. 1467, 2017.

A. Montanari, S. Nawaz, C. Mascolo and K. Sailer, “A study of Bluetooth low energy performance for human proximity detection in the workplace,†in 2017 IEEE International Conference on Pervasive Computing and Communications (PerCom), pp. 90-99. IEEE, 2017.

S. Kamath and J. Lindh, “Measuring Bluetooth® low energy power consumption,†in Texas instruments application note AN092, Dallas (2010).

Kuo, Feng-Wei, S. B. Ferreira, H. N. R. Chen, L. C. Cho, C. P. Jou, F. L. Hsueh, Madadi, I., Tohidian, M., Shahmohammadi, M., Babaie, M. and Staszewski, R.B., "A Bluetooth low-energy transceiver with 3.7-mW all-digital transmitter, 2.75-mW high-IF discrete-time receiver, and TX/RX switchable on-chip matching network," in IEEE Journal of Solid-State Circuits 52, no. 4 (2017): 1144-1162.

H. Chu and M. Chien, “An adaptive Bluetooth low energy positioning system with distance measurement compensation,†in International Conference on Mobile and Wireless Technology, pp. 223-234. Springer, Singapore, 2018 pp. 1–10.

Downloads

Published

2019-12-24

How to Cite

Muhammad Rusydi, M. R., Azhar, A., Mohd Nordin, I. N. A., & Ahmmad, S. N. Z. (2019). Smart Current Monitoring System with Relay Breaker. ELEKTRIKA- Journal of Electrical Engineering, 18(3-2), 37–41. https://doi.org/10.11113/elektrika.v18n3-2.198