Robotic Arm Control using Internet of Things (IoT)
DOI:
https://doi.org/10.11113/elektrika.v18n3-2.201Keywords:
Android mobile device, Arduino Yun, Internet of Things (IoT), robotic armAbstract
Robotic arm is a reprogrammable and multifunctional manipulator design to assist human in various surroundings. It is able to overcome human inefficiency in performing repetitive task such as pick and place operation. Thus, industrial in assembly and manufacturing have widely integrated robotic arm into their assembling line to overcome the problem of human inefficiency. Internet of things (IoT) allow data to be exchange between devices through the connection of many devices. The integration of internet of things with robotic arm allows smart industry to be realized. The purpose of this research is to design and build a three degree of freedom robotic arm with a mechanical gripper. The robotic arm can be controlled remotely through android mobile device to perform pick and place operation while Matlab provides the graphical movement of the robotic arm as a feedback.References
A. Kumar, A. Mishra, P. Makula, K. Karan, and V. K. Mittal, "Smart Robotic Assistant," in IEEE Reg. 10 Symp., Ahmedabad, India, 2015, pp. 25-28: IEEE.
A. Shukla and H. Karki, "Application of Robotics in Onshore Oil and Gas Industry - A Review Part I," Rob. Auton. Syst., vol. 75, pp. 490-507, 2016.
S.-H. Kim, Y. J. Shin, K.-S. Kim, and S. Kim, "Design and Control of Robot Manipulator with a Distributed Actuation Mechanism," Mechatronics, vol. 24, no. 8, pp. 1223-1230, 2014.
H. A. F. Almurib, H. F. Al-Qrimli, and N. Kumar, "A Review of Application Industrial Robotic Design," in 9th Int. Conf. ICT Knowl. Eng., Bangkok, Thailand, 2012, pp. 105-112: IEEE.
P. Suresh, J. V. Daniel, V. Parthasarathy, and R. H. Aswathy, "A State of The Art Review on the Internet of Things (IoT) History, Technology and Fields of Deployment," in Int. Conf. Sci. Eng. Manage. Res. (ICSEMR), Chennai, India, 2014, pp. 1-8: IEEE.
I. Ungurean, N. Gaitan, and V. G. Gaitan, "An IoT Architecture for Things from Industrial Environment," in 10th Int. Conf. Commun. (COMM), Bucharest, Romania, 2014, pp. 1-4: IEEE.
M. A. Islam, N. H. Sharif, M. S. P. Tameem, S. M. H. Chowdhury, M. C. Kumu, and M. F. Hossain, "IoT-Based Robot with Wireless and Voice Recognition Mode," in Emerging Technol. Data Min. Inf. Secur.: Springer, 2019, pp. 743-752.
A. A. Badrul Hisham, S. A. Saad, M. R. R. Ahmad, R. A. Rahim, N. H. Idris, and M. H. I. Ishak, "Review of Safety Evaluation of Thermal Wearable Power Harvesting Device " Int. J. Integr. Eng., vol. 9, no. 4, pp. 76 - 84, 2017.
P. S. Chee, M. Nafea, P. L. Leow, and M. S. M. Ali, "Thermal Analysis of Wirelessly Powered Thermo-Pneumatic Micropump Based on Planar LC Circuit," J. Mech. Sci. Technol., vol. 30, no. 6, pp. 2659-2665, June 01 2016.
M. Nafea, A. AbuZaiter, S. Kazi, and M. S. Mohamed Ali, "Frequency-Controlled Wireless Passive Thermopneumatic Micromixer," J. Microelectromech. Syst., vol. 26, no. 3, pp. 691-703, 2017.
M. Nafea, A. Nawabjan, and M. S. Mohamed Ali, "A Wirelessly-Controlled Piezoelectric Microvalve for Regulated Drug Delivery," Sens. Actuators, A, vol. 279, pp. 191-203, 2018/08/15 2018.
M. A. K. Yusoff, R. E. Samin, and B. S. K. Ibrahim, "Wireless Mobile Robotic Arm," Procedia Eng., vol. 41, pp. 1072-1078, 2012.
M. K. Ishak, M. I. Roslan, and K. A. Ishak, "Design of Robotic Arm Controller based on Internet of Things (IoT)," J. Telecommun. Electron. Comput. Eng., vol. 10, no. 2-3, pp. 5-8, 2018.
A. A. Badrul Hisham, M. Nafea, A. B. Aujih, M. H. I. Ishak, and M. S. Z. Abidin, "Racer: A Simulated Environment Driving Simulator to Investigate Human Driving Skill," in Modeling, Design and Simulation of Systems: 17th Asia Simulation Conference, AsiaSim 2017, Melaka, Malaysia, August 27 – 29, 2017, Proceedings, Part II, M. S. Mohamed Ali, H. Wahid, N. A. Mohd Subha, S. Sahlan, M. A. Md. Yunus, and A. R. Wahap, Eds. Singapore: Springer Singapore, 2017, pp. 534 - 547.
A. A. Badrul Hisham, A. B. Aujih, M. H. I. Ishak, and M. S. Z. Abidin, "Accuracy and Quickness Criterion-based Driving Skill Metric for Human Adaptive Mechatronics System," J. Teknol. (Advances on Intelligent Control and Robotic), vol. 78, no. 6 - 13, pp. 9 -16, 2016.
A. A. Badrul Hisham, A. B. Aujih, M. H. I. Ishak, and M. S. Z. Abidin, "Car Position and Orientation based Driving Skill Metric for Analytical Driving Skill Index Evaluator," J. Teknol. (Sensor and Its Applications), vol. 78, no. 7 - 4, pp. 27 - 33, 2016.
M. H. I. Ishak, M. Mazni, and A. A. Badrul Hisham, "Human Driving Skill for Human Adaptive Mechatronics Applications by using Neural Network System " J. Teknol. (Bioengineering and Ergonomics), vol. 76, no. 7, pp. 97 - 101, 2015.
K. Gawli, P. Karande, P. Belose, T. Bhadirke, and A. Bhargava, "Internet of Things (IOT) based Robotic Arm," Int. Res. J. Eng. Technol., vol. 4, no. 03, 2017.
A. A. Badrul Hisham, M. H. I. Ishak, C. K. Teik, and N. H. Idris, "Bluetooth-Based Home Automation System using an Android Phone," J. Teknol. (Sciences & Engineering), vol. 70, pp. 57 - 61, 2014.
A. A. Badrul Hisham, W. L. Xuan, M. H. I. Ishak, N. H. Idris, and A. M. Nawi, "Mobile Inspection Robot for Heating, Ventilation and Air Conditioning (HVAC) Ducting Systems," J. Teknol. (Sciences & Engineering), vol. 73, no. 6, pp. 89 - 93, 2015.
X. Feng and X. Huang, "The Research of Smart Home Robots Based on 3G Mobile Network," Appl. Mech. Mater., vol. 631–632, pp. 184–187, 2014.
M. Nafea, A. A. Badrul Hisham, N. A. Abdul-Kadir, and F. K. Che Harun, "Brainwave-Controlled System for Smart Home Applications," in 2nd Int. Conf. Bio Signal Anal. (ICBAPS 2018), Kuching, Malaysia, 2018, pp. 75-80: IEEE.
Downloads
Published
How to Cite
Issue
Section
License
Copyright of articles that appear in Elektrika belongs exclusively to Penerbit Universiti Teknologi Malaysia (Penerbit UTM Press). This copyright covers the rights to reproduce the article, including reprints, electronic reproductions, or any other reproductions of similar nature.
