Graphical User Interface for Electrical Resistance Tomography System on Static Gas Bubble in a Vertical Metallic Column

Suzanna  Ridzuan Aw; Wan Azman  Wan Abdullah1; Ruzairi Abd Rahim; Yasmin Abd Wahab; Mohd Hafiz  Fazalul Rahiman; Zulkarnay Zakaria; Elmy Johana  Mohamed; Siti Zarina  Muji; Jaysuman  Puspanathan; Pei Ling Leow

Authors

Suzanna Ridzuan Aw University College TATI
Wan Azman Wan Abdullah1 University College TATI
Ruzairi Abd Rahim University of Technology Malaysia
Yasmin Abd Wahab Universiti Malaysia Pahang
Mohd Hafiz Fazalul Rahiman University of Malaysia, Perlis
Zulkarnay Zakaria Universiti Malaysia Pahang
Elmy Johana Mohamed
Siti Zarina Muji Tun Hussein Onn University of Malaysia
Jaysuman Puspanathan University of Technology Malaysia
Pei Ling Leow University of Technology Malaysia

Abstract

This paper presents the software development for the ERT system used to monitor the static two phase (liquid/gas) flow for the application of a metallic bubble column wall. The software is developed using Graphical User Interface (GUI) application program in MATLAB. The software contains numerous functions to enable users to obtain the necessary information from the research. The animated projection of a single pair projection of the sensitivity distribution for a conducting boundary strategy, along with its weight balance map and normalised sensitivity map, can be viewed from the sensitivity distribution dropdown list. The images for the metal column with several phantoms using COMSOL simulation and experimental data can be viewed by clicking the construct image button in the GUI. The value for the assessment of the quality of each image is also displayed concurrently for each phantom selected.

Author Biographies

Wan Azman Wan Abdullah1, University College TATI

This paper presents the software development for the ERT system used to monitor the static two phase (liquid/gas) flow for the application of a metallic bubble column wall. The software is developed using Graphical User Interface (GUI) application program in MATLAB. The software contains numerous functions to enable users to obtain the necessary information from the research. The animated projection of a single pair projection of the sensitivity distribution for a conducting boundary strategy, along with its weight balance map and normalised sensitivity map, can be viewed from the sensitivity distribution dropdown list. The images for the metal column with several phantoms using COMSOL simulation and experimental data can be viewed by clicking the construct image button in the GUI. The value for the assessment of the quality of each image is also displayed concurrently for each phantom selected
Ruzairi Abd Rahim , University of Technology Malaysia

This paper presents the software development for the ERT system used to monitor the static two phase (liquid/gas) flow for the application of a metallic bubble column wall. The software is developed using Graphical User Interface (GUI) application program in MATLAB. The software contains numerous functions to enable users to obtain the necessary information from the research. The animated projection of a single pair projection of the sensitivity distribution for a conducting boundary strategy, along with its weight balance map and normalised sensitivity map, can be viewed from the sensitivity distribution dropdown list. The images for the metal column with several phantoms using COMSOL simulation and experimental data can be viewed by clicking the construct image button in the GUI. The value for the assessment of the quality of each image is also displayed concurrently for each phantom selected.

Graphical User Interface for Electrical Resistance Tomography System on Static Gas Bubble in a Vertical Metallic Column

Authors

Abstract

Author Biographies

Downloads

Published

Issue

Section

License

How to Cite

ELEKTRIKA